
Three AV rental quotes land in your inbox, and none of them agree. One lists a “120m² LED wall”, another quotes per panel without stating the pitch, and the third is a single line saying “full AV package — ask us”. You cannot compare what you cannot read. Selecting an AV vendor for a conference is a procurement exercise, not a beauty contest, and the organiser who picks on price alone usually pays for it at load-in. This guide gives event planners a repeatable AV vendor selection checklist for briefing and comparing suppliers — the same discipline we apply on LED screen rental for conferences across Paris, Lyon and Cannes.
Why the Cheapest AV Quote Usually Loses
AV rental pricing is not comparable line-for-line across vendors because the scope is hidden in the wording. A €4,000 quote and a €7,500 quote for the same 500-seat plenary can both be “correct” — the difference sits in processing, rigging, and labour, not the hardware.
Watch for the gaps. Does the quote include content switching and scaling, or just the panels? Are rigging, motors and chain hoists priced, or assumed? Who supplies the technician overnight when a panel driver fails during a keynote rehearsal? The vendor who itemises these will look more expensive until you add the “extras” the cheap quote omitted at the venue’s drayage desk.
Procurement discipline beats negotiation bravado. Compare like for like, in writing, and make the vendor state what is excluded as clearly as what is included.
What to Compare: A Vendor Comparison Table
Score every bid against the same columns. Weight them for your event — a hybrid conference leans harder on streaming and redundancy, a pure live keynote leans on audio and screen management.

| Comparison axis | What to ask | Why it decides the bid |
|---|---|---|
| Scope clarity | Panels, processing, rigging, power, labour itemised separately? | Reveals the true all-in figure and exposes hidden extras |
| Technical specification | Pixel pitch in mm, nits, refresh rate, spare ratio? | Determines legibility at distance and on-camera performance |
| Redundancy | Spare panels, backup switcher, dual power feeds? | A dead panel mid-keynote has no fix without a hot spare |
| Onsite crew | How many technicians, for how many hours, on which shifts? | Setup, show-call and strike labour drives cost and risk |
| Response time | Contractual time to replace a failed module? | Separates a production partner from a box-shifter |
| Site experience | Has the vendor worked this venue before? | Knows load-in doors, rigging points and curfew rules |
| Insurance & liability | Public liability cover, equipment insurance, venue compliance? | Protects you when rigging or panels damage the venue |
The AV Vendor Selection Checklist
Work through these steps in order. The timeline markers assume a mid-sized conference with a workable runway.
- Define the brief in writing (90 days out). Room dimensions, ceiling height, seating capacity, session types (keynote, panel, hybrid), and number of source laptops. A vendor cannot spec without these.
- State the content format up front. 1080p or 4K, 16:9 or ultrawide, PowerPoint versus playback — this drives processing and panel count.
- Request three itemised quotes (75 days out). Give every vendor the same brief so bids are comparable. Ask each to price rigging, power, and labour as separate lines.
- Verify the technical spec, not the marketing copy. Get pitch, brightness and refresh in writing. If two vendors quote “high-brightness LED”, you have no basis to compare.
- Interrogate redundancy and contingency. Ask the spare-panel ratio, backup switcher model, and their stated replacement time for a failed module.
- Check crew numbers and shift patterns. Confirm who covers setup, the live show, and strike — and whether overtime is pre-agreed.
- Confirm insurance, compliance and venue fit (60 days out). Request liability certificates and confirm the vendor knows the venue’s rigging and curfew rules.
- Lock the schedule and rehearsal plan (30 days out). Agree a sound check, a full tech rehearsal, and a sign-off process before doors open.
How to Brief an AV Vendor: The One-Page Spec
The cost of a conference AV package is driven less by panel count than by the production layer around it. A brief that names these factors gets you an accurate quote first time:

- Screen size and pitch. The viewing distance to the back row sets the maximum pitch. Detailed guidance on pitch and resolution for conference stages sits in our LED resolution and pixel pitch explainer.
- Processing and switching. Multi-window scaling, clean switching, and picture-in-picture for hybrid add real cost over a single-input feed.
- Rigging versus ground support. Flying a wall from a truss or rigging point is cleaner but needs structural sign-off; ground-stacked walls need floor space and sightline checks.
- Power. A large LED wall draws meaningful current and often needs a dedicated three-phase supply — confirm the venue’s drop-cord provisioning early.
- Audio. Channel count, wireless stability in a crowded RF environment, and whether the room needs delay speakers all affect the audio line.
- Streaming and recording. If the conference is hybrid, the camera, encoder and audio-to-broadcast chain belongs in the same brief.
For a fixed conference-room install rather than a one-off rental, the equipment mix shifts, and the fundamentals are covered in our conference room AV setup guide. For large multi-day events, the venue-relations layer matters as much as the kit — see how we approach the AV layer when running a convention in France.
Red Flags That Signal a Bad AV Rental Supplier
Some behaviours predict a bad event before load-in.
- Refusal to itemise. A vendor who won’t separate rigging and labour is hiding margin, not simplifying.
- No stated redundancy. If there is no spare panel or backup switcher, a single failure is a black screen.
- No venue familiarity. First-timers discover the load-in lift is too short for the flight case at 07:00 on show day.
- Vague timing. No written rehearsal and show-call schedule means the crew arrives when the vendor feels like it.
- Pressure to skip the rehearsal. Anyone confident of their kit will welcome a full tech check. Anyone avoiding it has a reason.
Frequently Asked Questions
How many AV vendors should I get quotes from?
Request at least three itemised quotes against an identical brief. Three gives you a genuine price band and exposes which vendors itemise scope properly. Fewer than three removes your negotiating position and hides how the market is pricing the same work.
Should I choose an AV vendor on price alone?
No. Price is one axis in a comparison that also covers redundancy, crew numbers, venue familiarity and insurance. A cheaper quote that omits rigging and spares is not cheaper — it moves cost to you at the venue’s drayage desk or during the show.
What must an AV rental quote include to be comparable?
Panels and screen hardware, processing and switching, rigging or ground support, power provisioning, crew labour for setup, show and strike, and contingency spares. Ask every vendor to list exclusions as explicitly as inclusions, or you cannot compare bids fairly.
Does the AV vendor need to have worked my venue before?
Ideally yes. Venue familiarity means knowing load-in doors, ceiling heights, rigging points and noise curfews — details that cause delays when discovered on show day. If they haven’t, insist on a site survey before the contract is signed.
How far in advance should I book conference AV rental in France?
Large LED walls and premium audio for a multi-day conference should be booked at least two to three months out, especially in Paris and Cannes during peak event season. Confirming the brief around 90 days out leaves room to compare vendors without paying rush premiums.
What does an AV vendor need from me to quote accurately?
Room dimensions, ceiling height, seating capacity, session format, content resolution, and whether the event is live, hybrid or recorded. Provide these in writing with a single brief and every vendor quotes the same job, which is the only basis for a fair comparison.
Get an Itemised AV Quote for Your Next Conference
A vendor comparison is only as good as the brief behind it. Send us your room spec, session format and date, and we’ll return an itemised quote that separates hardware, processing, rigging and crew so you can score it against the others line by line. For LED-led stages see our conference LED screen rental; for wayfinding and registration screens, our digital signage display rental covers the rest of the venue.
Request an AV vendor quote and put the checklist to work.


