
The real question is not “how much” but “who carries the asset”
Ask what an LED display costs and you will get a number that means nothing until you know whether you are buying it or renting it. A permanent digital signage installation and a rented display for a three-day event share the same core hardware, but the money flows in opposite directions: one loads the cost up front and spreads it over years, the other keeps it on the invoice for the days you use it. Most organisers booking digital signage and display rental should be on the rental side, because they need the screen for a date, not for a decade.
This is a breakdown of what actually drives the cost of an LED display, so you can tell the two paths apart and price either one without surprises.
Pixel pitch and size: the two numbers that set the price
The screen is the single biggest line. What moves its cost is pixel pitch — the distance between LEDs, measured in millimetres — and the physical size, which is built in 0.5 m increments from 500 mm cabinets. Smaller pitch means more LEDs per square metre and a higher price. It also decides how close the audience can stand before the image falls apart, because the working rule across the rental trade is roughly 1 mm of pitch per 1 m of comfortable viewing distance.
| Pitch | Sharp from | Typical use |
|---|---|---|
| P4.8 | ~5 m | High hanging walls, arena backdrops |
| P3.9 | ~4 m | Aisle-facing walls, large stage backdrops |
| P2.6 | ~2.5 m | Exhibition stands — the default, visitors pass at 1–2 m |
| P1.9 | ~2 m | Close-up product detail, text-heavy content |
The temptation is to pay for the finest pitch on the sheet. The discipline is to pay for the pitch the viewing distance needs and not a step finer. A wall facing a highway or a large setback does not need fine pitch; a stand in a narrow aisle watching visitors at 1.5 m does. Buying sharpness nobody stands close enough to see is the easiest way to overspend on either path.

Installation, structure and rigging
Hardware is only part of the total. On an owned installation you pay for the structure that holds the screen safely: foundation or support steel, the fixings, the weather enclosure and the crane or lift work to get it up. Those are one-time costs that do not exist in a rental, because the rental supplier carries the cabinets, the frames and the rigging hardware as stock and reuses them across shows. What a rental does charge is the labour to build and strike the wall inside the venue’s move-in and move-out window, and labour is priced by the hour against a fixed slot.

In France the rigging path is not open to you. Suspension goes through the venue’s régie technique with venue-approved riggers and a structural note showing the load sits inside the truss capacity at the point you are using. A permanent install faces the same logic with a different sign-off, but a rental build absorbs it as a known step rather than a design problem.
Power: metered, ordered and easy to under-budget
An LED wall draws continuous power, and in France the electrical supply is ordered and metered rather than bundled into the room. As an order of magnitude, a 5 m P2.6 wall draws in the region of 3–4 kW at show brightness, before audio, lighting and the media server. On a permanent installation the running power is a monthly bill you carry forever; on a rental it is a few days of load inside the venue’s supply. Either way, upgrading a supply after the technical file is filed is expensive, so the load count belongs in the plan, not on move-in day.
Content management and software
Every digital display needs a way to play content. On a permanent installation that means signage software with scheduling, remote access and, if you sell the space, proof-of-play logs — a recurring licence that runs month after month. On a rental the playback device usually arrives with the package and the operator runs the show, so the software never becomes your line item. If you plan to run content yourself, ask what player the rental includes and how the schedule is set, because that is where ad-hoc charges creep in.
Maintenance: the cost that only exists if you own it
Maintenance is the quiet divider between the two paths. A permanent screen needs routine cleaning, seal checks, calibration and module replacement, and a neglected display loses brightness and colour accuracy long before it dies. A rental supplier carries that burden as fleet management — you never see a maintenance invoice, because the cost is folded into the day rate and spread across every show the stock works. For an organiser running one or two events a year, owning a screen means paying for maintenance twelve months to use it for twelve days.
Rent or own: matching the asset to the use
| Rent for events | Own for permanent signage | |
|---|---|---|
| Upfront | None — day rate | Screen, structure, install |
| Recurring | Per event | Power, software, maintenance every year |
| Maintenance | Supplier’s problem | Your line item |
| Flexibility | Swap size and pitch per show | Fixed to one spec |
| Best for | Events, campaigns, pilots, multi-city | Year-round displays with ad revenue |
Ownership only pays off when the screen works continuously — a year-round display generating advertising revenue or a fixed welcome screen that justifies its capital cost. For everything that is an event, a campaign or a test, rental wins on both cash flow and flexibility: you match the pitch and size to each show instead of committing to one, and you avoid the maintenance tail. If your displays live on exhibition floors, the equipment that earns its place has a specific profile, which we broke down in LED walls that make your exhibit stand out and in our guide to LED video walls for large trade shows.
Approvals and paperwork in France
A permanent display runs into planning and signage rules that vary by commune — visibility corridors, brightness limits and structural permits all have their own timelines. A rental build avoids most of that because it is temporary, but it still needs the venue’s technical file: stand plans, electrical load and rigging details submitted weeks ahead, plus documented M1 or B-s1,d0 reaction-to-fire classification for the cabinets and rigging. The difference is scope, not existence — rental trades a permit process for a technical-file process.
Frequently asked questions
Is it cheaper to rent or buy an LED display?
Rent if you need the screen for events or short campaigns; the day rate covers maintenance, software and storage you would otherwise carry all year. Buy only if the display runs continuously and earns its capital cost back.
Does a finer pixel pitch always cost more?
Per square metre, yes. But the wrong metric is pitch alone — it is pitch against viewing distance. Match the pitch to how close the audience stands and you stop paying for sharpness nobody sees.
What is hidden in a rental quote?
Labour hours outside the move-in window, power upgrades, and content or playback support. Confirm early access, the technical-file deadline and what the media player includes before comparing day rates.
If you are weighing a one-off show against a permanent install, send us the venue, the viewing distances and the run of show, and we will recommend the screen and price it either way. Explore our LED rental for experiential marketing, or request a quote and we will come back with a concrete configuration and cost.


